Відео

Don't worry about the "Frankenstein's Monster" look. With paint, that will all disappear, especially at distance. Just add some stripes or shapes that accent the lines you want. Awesome job on the air lockers. o0 wow that's high tech.

If I may make a suggestion on reducing panel noise when on the trails. I would suggest to buy a thin rubber mat from Amazon or somewhere and cut it into square or rectangle pieces and place it between the panels and the frame holder and noise vibrations should be reducing significantly.

Wow to be aluminum you sure got some nice chips instead of strings

Why dinft you just hook into the intake manifold and use engine vacuum? Couple valves. boom. done.

Bro you better start painting all your projects after you mock everything up your gonna have rust buckets in No time plus your gonna have to wire wheel all that rust off it's gonna be harder work then the whole dang build .

You need to fix the rear suspension it looks Squatted by accident you need to level out the suspension especially if you plan on jumping it

Should have done Volkswagen style running boards with the black rubber on top

His rant is a lot funnier @ 2X Speed LoL 😂

I think you killed the engine at the first burnout gheezus Louizhuss why doesn't anyone pay attention to right & proper break-in periods LoL

Thinking it needs more suspension strength in the rear cause it's squatted + doing burn outs leaves you with burnt tire rubber in your blood it's so extremely small in size when you breath it in it enters your bloodstream which is not Good for you

You blow my mind with fabrication skills.

If you ever buy an R/C car....then you'll learn that one of the worst things you can do to the transmission is give full throttle when the wheels are off the ground.

Dude your musical score is like watching paint dry.

I'm still in love with the trophy truck fiberglass body. That said, I love the look of the panels. Hell, call it Frankentruck or some other play on the monster. 👍👍

You've used a fan on every water cooled motor you have built except this one! Does that make sense, I want to hear your logic on this!

The mini jeep and mini barbie jeep gotta be shaking now.. 😅

There's a method of shrinking the metal in places, to reduce the panels drum like characteristics. I forget what it was called, but it didn't take long.

Id rather b watchin u weld.

Windrock, so you are near bleepin jeep then?

pretty cool man! nice work is that lathe good for threading? i do not think i ever saw a lathe use a dividing head lots on mill-machines anyways good video lots of good tips,clean work. PEACE!

Just found your channel and I’m enjoying the videos. I will say it’s hard to follow some builds without them being in a playlist. Was watching the trophy truck build and kept feeling like I missed some videos at the end

It looks like a gas RC car when it's at a distance, insane.

The scale of this thing is spot on

Blacked out windows and forced air scoops on the side ? Could use pc fans for radiator to save money

Cool tho looks like an RC car from a distance 😂

Weight the front down a bit to help with steering all the weight is at the back, wheely machine 💪

Fuel pick up line, g force is playing its part I think a bit, if all your fuel is the wrong end of the tank its potentialy cutting fuel off temporarily until you stabilise and it comes back possibly ?

In my eyes, it has a Mad Max look, and I like it 😎👍

I think the aluminum has to be so heavy that a thick plastic or tinted plexi would be a better solution

doesn’t the engine create vacuum? and couldn’t you use a solenoid?

MAD MAX rides again

You better paint it, because it's gonna blind you on sunny days

Could you not replace the panels with plastic/ perspex ?

26:39 yay that was one of my comments. It's looking a lot better now it's panelled. But you got to admit it would look cool af with a shell

The fuel systems on those engines are meant to be gravity fed to a pulse pump. When you use the pulse pump as your main fuel pump, its efficiency is greatly reduced

You need to increase the fuel pressure, and that will fix your low power issue in turns

Man, I bet those hubs weigh a ton 😮

Why not just run a vacuum line from your intake to switch the hubs ? I just don't understand why you didn't do that right from the beginning. If you are concerned that the engine doesn't produce enough vacuum by volume, you can easily use a readily available reservoir. Same with a switching device. This just seems like a lot of unnecessary work.

👍👍👌

That little monster will be come heavy like a school bus

😁👍🏼

Vacuum acts like pressure, so, as long as there are no real restrictions, all the vacuum levels would be same through everything hooked up on the same set of lines. It would have involved making you vacuum "syringe" twice the size, but you could have made just one, if you had used a similar roll-pin design to differentiate the 2 vacuum levels. You could have also made 2 "syringes" and used one for engagement and the second for disengagement. Like I said though, there cannot be much restriction...well, at least not much restriction difference between the right and left lines...so, decently sized hoses the same length for the 2 sides. Also, you could have gotten away with just buying some pneumatic pistons to act like the syringes. Manufacturers like Clippard sell them very readily.

Why don’t you just pull hose from carburator and use existing vacuum?

Maybe, if you change the hex head bolts out for button heads, it might look better. Just My thoughts

Damn dude You do such a good job at custom modifying everything! And after watching the video where you took it out in the mud, any type of panels on the outside to help block it from completely caking the inside is awesome! Great work, can't wait to see you when this is totally done!

use washers please 😁

On all those body panels you should use real rivits....you've probably got 50 lbs of bolts on that buggy....between that and all the steel panels that could have been aluminum....I think you could have made that buggy 500lbs lighter if you would have been weight conscious

Think about it guys it's a snowmobile engine jetted to run in the cold in the area where sold. They can always be jetted better for your area. By nature it should be rich as heck in the summer.

That things a beast lol what else can I say #inspired

Not sure why you are bothering to rivet some panels, just weld them all and be done with it.